VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-04-2018, 07:25 PM
jfisher jfisher is offline
 
Join Date: Jan 2018
Location: MANCHESTER
Posts: 8
Default Quickbuild fuselage gear leg holes?

So I just received the QB fuselage for my RV-14A via Partain. Very pleased with the shipping process.
Going thru the plans to make sure everything was completed when I discovered something interesting. On page 26-10, step 7 it says to cut out a rectangular hole for the main gear (tri-gear) and debur the edges before riveting the bottom skins together.
Problem is the hole was not cut out and the skins are riveted together. Not sure how to proceed. Will call Van's Monday am, but wondering if anyone else has dealt with this on the QB fuselage?
__________________
JFish
VAF 2018 dues paid
Started building RV-14A 1/5/18
Reply With Quote
  #2  
Old 08-05-2018, 04:52 AM
MED MED is offline
 
Join Date: Jul 2015
Location: Aiken, SC
Posts: 267
Default

QB here, too. The cut is easily done. Cut carefully, then, use a nibbler to get right up to the edge. Did not take long and was not as scary as I feared.
__________________
MED
140236
N435MD reserved
Reply With Quote
  #3  
Old 08-05-2018, 07:15 AM
jfisher jfisher is offline
 
Join Date: Jan 2018
Location: MANCHESTER
Posts: 8
Default

Thanks. Just needed to hear that I wasnít the only one.
Will go easy on the cut.
__________________
JFish
VAF 2018 dues paid
Started building RV-14A 1/5/18
Reply With Quote
  #4  
Old 08-08-2018, 05:02 PM
azflyer21 azflyer21 is offline
 
Join Date: Nov 2016
Location: Scottsdale AZ
Posts: 74
Default

Guys,
I'm expecting my QB Fuse next week, I was wondering what you placed it on in your shop? Does a standard workbench work?
__________________
Kevin Lippert
Zenith 750 completed 2016 -
Sold

N902X reserved
RV-14a Empennage Done
QB Wing QB Fuse inprogress
Build Log
Reply With Quote
  #5  
Old 08-08-2018, 05:23 PM
RV-14E's Avatar
RV-14E RV-14E is offline
 
Join Date: Jun 2018
Location: Colorado
Posts: 51
Default

Not a quickbuild, but in either case, a properly high and sturdy table works great. Example would be the EAA Chapter 1000 Workbench. I decided to build four.



These are from when I completed the mid fuse side structure.





This is during the aft fuse attachment.



This arrangement persisted through gear and wheel attachment.



Until the plane was ready for the engine.

__________________
E
http://rv-14a.blogspot.com/

Last edited by RV-14E : 08-08-2018 at 05:27 PM.
Reply With Quote
  #6  
Old 08-08-2018, 06:36 PM
mturnerb mturnerb is offline
 
Join Date: Apr 2015
Location: Ponte Vedra, FL
Posts: 643
Default

I built five of the benches, with a couple of modifications - I made all but one of them 2x4 feet since Home Depot has pre-cut plywood and pressed "project boards" in that size - much easier than cutting down a 4 x 8 sheet. I also made a 3-inch overhang on 3 sides to make it easier to clamp items on the tops. This made the bases a bit smaller but it was easy to modify the dimensions to make it work. Various arrangements of the benches for various stages of the project....
__________________
Turner Billingsley
RV-14A In Progress
N14VB Reserved
https://turnerb14a.blogspot.com/
Reply With Quote
  #7  
Old 08-09-2018, 08:25 AM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 587
Default

On mine I built without overhang but bolted a 3/4 mdf sheet on top with overhang. Iíve used the mdf to hold clecos and such without too much sacrifice. Turned it over like an old mattress once. I also fashioned a bracket on the side of one to use my drdt simpler at the right height to the table.
__________________
<------------------------------------------------->
N1463 seems a good number....
<------------------------------------------------->
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:38 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.