VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 07-25-2018, 12:26 PM
ksouthar ksouthar is offline
 
Join Date: Apr 2005
Posts: 98
Default Vans Tachometer Specs

Looking for technical details for the tach generator used to drive the Van's Tach. Not much information on the device itself - a paper label that says only "8 pulses per revolution". No other information on manufacturer, etc.

I am halfway through the installation of an MGL Avionics MAP-1 combination tach/manifold pressure gauge (although I a fixed pitch prop). Since I am headed towards the installation of P-Mags (which need manifold pressure), I thought, what the hey, I'll just add the gauge too. Bad plan....... at least so far.

The MGL manual is misleading in that it has a "mag check" feature. Unfortunately, it won't take an input from two different sources. So, the mag check is useless unless you only want to check the drop on the one mag you have connected to the gauge.

Next thought is perhaps to take the signal off the Tach Generator. It is engine driven and not tied to either mag. Just need to find out if I can use it as a source.

A separate manifold pressure gauge isn't really an option. Panel is already packed and no room for one more gauge - hence the combination gauge which seemed a good plan until reality set in.

Keith
N355RV
RV9-A
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:28 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.