Ray Brunet
Member
Can someone tell me how much material I need to remove from the wing skins were they meet together to make the transition smoother at the forward spar. Anybody have pictures of this they would send me???
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
How much material should I remove
- Thread starter Ray Brunet
- Start date
I filed the edge down to a taper from about 4 inches from the corner. How much material you remove was a question I had at the time also. You have to have enough skin there to make a good dimple for the rivet. I think I removed about 1/3 of the skin thickness if my memories serves me. Don't spend much time on on it.
Jim
9a
Jim
9a
