Vans posted some videos showing how to do some of the fiberglass work on the canopy. I think that is Scott in the video, and if so public thanks to him for all the great advice here as well as elsewhere.
One thing which would be great would be to publish some of these for Fuel tank sealant work (showing baffle, and maybe one rib). That is an area which is seldom covered in Eaa classes, and just like the glass work is often feared due to unfamiliarity. Basic sheet metal is well covered by classes and videos so that is all set.
Kudos to Vans for this.
https://www.vansaircraft.com/public/service-rv14.htm
Just saw that my spelling leaves a lot to be desired in the title, sorry cannot change it!
One thing which would be great would be to publish some of these for Fuel tank sealant work (showing baffle, and maybe one rib). That is an area which is seldom covered in Eaa classes, and just like the glass work is often feared due to unfamiliarity. Basic sheet metal is well covered by classes and videos so that is all set.
Kudos to Vans for this.
https://www.vansaircraft.com/public/service-rv14.htm
Just saw that my spelling leaves a lot to be desired in the title, sorry cannot change it!