erich weaver
Well Known Member
The electric flaps on my -7A are only working intermittently lately. The problem seems to be in the small circuitboard controller that I believe came from Vans and that is currently installed in the same area as the flap motor. I liked the simplicity of it, with no set positions, just push switch up or down and monitor the flap position visually. This controller doesnt seem to be listed on the Vans website any longer though.
Any recommendations for a replacement? Would like to keep it simple and also keep the controller mounted in the same area if possible.
thanks
erich
Any recommendations for a replacement? Would like to keep it simple and also keep the controller mounted in the same area if possible.
thanks
erich