Just a thought

O

olderthandirt

Well Known Member

• Feb 8, 2016

• #1

So after Canopy is riveted in and fiber glassed over rivets etc. what if the canopy needed to be replaced??

 

Mel

Legacy Member

Mentor

• Feb 8, 2016

• #2

You cut out the fiberglass and drill out the rivets. Been done lots of times.

 

R

RV Jerry

Well Known Member

• Feb 9, 2016

• #3

fairing

i make all of my fairings removable, they are laid up over a taped off canopy with release wax then removed finished and installed with screws ,looks good when done

 

S

sjhurlbut

Well Known Member

• Feb 9, 2016

• #4

Done

Did it with Sikaflex. Complete replacement. Piece of cake.