VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-17-2019, 05:17 PM
iamtheari iamtheari is offline
 
Join Date: Nov 2017
Location: ND
Posts: 336
Default Dimpling C-01452 Canopy Clip (page 38-28 step 3)

I was about to dimple the canopy clips for CS4 rivets, but it appears the holes are undersized. These obviously get bent as you rivet them, so the angle of the dimple is probably not critical. I just want to confirm that I'm not working with the wrong part or anything before I dimple them (for AN470AD3 rivet heads) and match drill #30 to enlarge the hole in the clip as I drill it into the canopy skin.

Is that right? Or should I drill #30 the canopy clips and then dimple them for CS4 rivets before I separate them and match drill #30 to the canopy skin?
Reply With Quote
  #2  
Old 06-26-2019, 11:09 PM
iamtheari iamtheari is offline
 
Join Date: Nov 2017
Location: ND
Posts: 336
Default

I went with the drill #30, then dimple CS4, then separate, debur, match drill #30 to canopy skin, and rivet into place. It worked out well enough.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:29 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.