Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Old 04-23-2019, 10:55 PM
iamtheari iamtheari is offline
Join Date: Nov 2017
Location: ND
Posts: 376
Default Ground strap tab bending?

I am working a little on the firewall forward kit tonight. The WH-P25 that connects the battery negative terminal to the firewall has the tabs installed at 90 degrees apart. It seems to me that there are two options based on the clocking of the tabs.

1. Allow the ground strap to twist 180 degrees between the firewall and the battery
2. Bend the firewall-side tab of the strap away from the strap so that it can be bolted to the firewall flipped from how it would have to be bolted on with no bending

Is there a preferred answer?
Reply With Quote
Old 04-28-2019, 08:48 AM
Tmartin66 Tmartin66 is offline
Join Date: Jun 2016
Location: Washington,Oklahoma
Posts: 43
Default Bend it

Just mounted mine yesterday. Bend it to fit. I would figure out how you wanted it and bend it one time if possible. Soft metal and bends easily.
T. Martin
RV-14A under construction
N114TM reserved
Dues paid 2020
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 05:40 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.