VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 10-27-2018, 04:17 PM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 632
Default Pmag wires and baffle phenolic

Iíve got dual PMags and the red high performance spiral wound plug wires. The baffle phenolic holes are too small. But I found that using the 0.311 reamer that we had to have for the fuse/wing spar that this makes the hole perfect for this wire.
__________________
<------------------------------------------------->
N1463 seems a good number....
<------------------------------------------------->
Reply With Quote
  #2  
Old 10-27-2018, 04:57 PM
Tom023 Tom023 is offline
 
Join Date: Jul 2011
Location: Cypress, TX
Posts: 250
Default

Thanks for the tip. There are benefits being four weeks behind you in the build
__________________
RV14A #140083
Wings, empennage, fuselage and finish very, very slow builds completed. Avionics and engine installed.
Down to last 90%.
2017 Donation
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:28 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.