I am switching my RV-7 tail kit to an RV-8 which will require I build a new HS and Rudder. I just completed the RV-7 tail kit yesterday and did the lengthy service bulletin on the Horizontal Stab. Fiberglass tips for the HS not included as I will need them for the RV-8.
I am a military pilot and an A&P so rest assured that the build is good quality.
So, if you don't feel like doing the Service Bulletin on your HS (it is lengthy!!), you can buy mine, paint it, install it on your RV-7 and fly right away.
RV-7 Horizontal Stab (setup for electric trim) - $800
RV-7/9 Rudder - $400
Both - $1100
Pickup only (Converse, IN). This will give you a chance to check the work quality also.
Pictures to follow. FYI, this is my first post so learning is in progress.
kc135flyer at hotmail dot com