Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 11-03-2018, 09:40 AM
iamtheari iamtheari is offline
Join Date: Nov 2017
Location: ND
Posts: 304
Default Fuselage/firewall tip - do the rudder bearing block first

I just got done with some gymnastics and have a tip for RV-14 fuselage builders. When you get to page 27-02 step 4, stop and flip ahead a few pages to page 33-05 step 3. This would have been much easier to do with the F-14104 support angle anywhere other than riveted to the firewall inside the fuselage with the side skins in place.

Happy building, everyone!
Reply With Quote
Old 11-03-2018, 02:35 PM
dejavu dejavu is offline
Join Date: Mar 2010
Location: SF Bay Area, CA
Posts: 34
Default Different holes on the F-14104

Thanks for the heads up. I'll grab those parts and match drill the holes now.

An observation, the holes the plans specified to match-drill to on the F-14104 (33-05 Step 3) are not the same holes for installation (33-06 Fig 1). They're probably equally spaced apart.

Edited: I see the edge alignment now.
Mooney M20-F TN
Finishing Kit

Last edited by dejavu : 11-03-2018 at 02:39 PM.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 02:37 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.