Since you have the Beringer bulk hose and reusable fittings, put the 2 fittings on the accessories, and route the hose the way you want it. Mark with a sharpie, Cut, and assemble. Since Beringer is an aftermarket package, there is no set way of doing the lines. Yep---most builders put the PB Valve forward on the F14104 bracket.
Tom Swearengen, TS Flightlines LLC, AS Flightlines
Joint Venture with Aircraft Specialty
Teflon Hose Assemblies for Experimentals
Proud Vendor for RV1, Donator to VAF
RV7 Tail Kit Completed, Fuse started-Pay as I go Plan