What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Rudder Position and Strobe installation

kens_cockpit

Well Known Member
I'm installing the Whelan combined rear position light and strobe in the rudder. It's the new rudder tip with a nice little platform for the light. But things are pretty tight still How have others tackled this?

Thanks

Ken
 
Hi Ken,
I made a little backing plate out of .032 and riveted that to the rudder with the nuts JB welded to the backing plate, works great
Kirk RV-8 fuse
 
Back
Top