VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 10-18-2019, 02:07 PM
Jskyking Jskyking is offline
 
Join Date: Apr 2018
Location: Huntsville,AL
Posts: 78
Default SERVICE BULLETIN 16-03-28 Question

Iím getting ready to install this SB and trying to discern if the bearings are to be pressed into the bracket. It doesnít appear that the bearing races inside the brackets will allow for these bearing to be pressed....It seems to me that the riveted brackets will hold the bearings firmly in place.
Any thoughts are greatly appreciated.
__________________
RV14 Empenage complete
Wings in work
Dues bypass eligible- paid anyhow
Reply With Quote
  #2  
Old 10-18-2019, 06:51 PM
mulde35d's Avatar
mulde35d mulde35d is offline
 
Join Date: Dec 2017
Location: Williamsburg, VA
Posts: 205
Default

No need to press them, they will lay in quite easily and then riveted in place.
__________________
Jon
RV-14A - N122X (IO-390 TB, WW 74HRT, G3X)
http://www.mykitlog.com/mulde35d
Empennage & Wings Complete
Fuselage In Progress
Finish Kit On Order
Research Always
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:32 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.