First, make sure you are measuring correctly. Was the gear off the ground while measuring? With the gear suspended, you are shooting for "0" toe-in/toe-out.
When correctly aligned, the RV style landing gear will have a slight amount of toe-out with the weight of the aircraft on the gear.
Mel Asberry..DAR since last century
A&P/EAA Tech Counselor/Flight Advisor/Nat'l Test Pilot School
Specializing in Amateur-Built and Light-Sport Aircraft
North Texas (8TA5)
RV-6 Flying since 1993, 172hp O-320, 3-Blade Catto (since 2003)
Legend Cub purchased 12/2017
FRIEND of the RV-1
Eagle's Nest Mentor
Recipient of Wright Brothers "Master Pilot" Award