What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

RV8 Static Port

Tag

Well Known Member
Friend
I?m about to dismantle the fuse after drilling. Would like to go ahead and drill for the static port but can?t find in the instructions where to drill for it. I know the general area approx 4 rivets below an aux longeron forward of a bulkhead, but what is the specified location per plans and where in the plans is it stated?

Thanks
 
Drawing 85 for the pre-punched kits shows the location as 4" down from the longaron rivets and 1" forward of the bulkhead rivets.
 
Thanks Andy

I looked at just about all the other dwgs!
BTW I have found your build log very helpful also...
Charlie
 
Back
Top