Decided to get it done. I have yet to paint touch-up, and re-install, but would advise it will take about 8 hours total to finish, if a flying plane. These are just some of the pictures to give you an idea of the job. Not overly messy. I put a fair amount on the inside of the brackets, and when I put them on a lot pushed out. Dipped/Covered the rivets as instructed also. Together there was enough extra to smooth out the extra all over the surface to seal up everything. Don't expect a leak problem.
I was prepared, and found out the one mix was able to do both job ( seal front plate also ).
John Bender
I was prepared, and found out the one mix was able to do both job ( seal front plate also ).
John Bender