VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 07-22-2018, 08:33 PM
mikerkba mikerkba is offline
 
Join Date: Sep 2008
Location: Ely, Nevada
Posts: 175
Default AFS ADAHRS pinouts and connections

I'm working vigorously this extended weekend with my A&P on a 5600 and associated components of a quick panel.

I might be overlooking something obvious in the AFS 5000 install manual, but I can't figure out the pinouts for the ADAHRS unit. It is the 9 pin Sub D connector, one end of which came with the connector installed.

And, once the connector is installed, does the cable run from the ADAHRS to one of the SV network jacks on the AFS ACM?

Lastly, both the Dynon radio and the AFS/Dynon autopilot have two SV network jacks? Do both (always) get connected, or need I just connect one to the network hub on the ACM?

Thanks for any help.
__________________
Mike Coster
BUILDER: N92MB RV7A (A/W 3/2009) - Sold
ADOPTED/reworking: N4032Q RV8A (8/2017)
KELY/Ely, NV
Reply With Quote
  #2  
Old 07-22-2018, 09:00 PM
N402RH's Avatar
N402RH N402RH is offline
 
Join Date: Oct 2005
Posts: 625
Default

http://dynonavionics.com/downloads/advanced/Advanced%20Quick%20Panel%20Installation%20Manual%2 0V5.0.pdf


Page 50 has the SV-Network wiring color code, ADAHRS uses the standard wiring.


Page 89 shows how to connect the SV-Network to the Advanced Control Module and devices. All of the devices with SV Network connections just need to be connected together. The devices that have two SV-Network ports can be used to connect the next device.


Answering from Oshkosh

Rob Hickman
Advanced Flight Systems

Last edited by N402RH : 07-22-2018 at 09:10 PM.
Reply With Quote
  #3  
Old 07-22-2018, 09:31 PM
mikerkba mikerkba is offline
 
Join Date: Sep 2008
Location: Ely, Nevada
Posts: 175
Default

Thank you Rob. I wanted to avoid interrupting you at the show.
I've been working from the AF-5000 manual, Ver.15.1, not the ACM manual you linked. That will help a bunch. If we have any questions, we can call the AFS office tomorrow.
__________________
Mike Coster
BUILDER: N92MB RV7A (A/W 3/2009) - Sold
ADOPTED/reworking: N4032Q RV8A (8/2017)
KELY/Ely, NV
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:13 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.