Riveting the firewall brackets

P

PrescottB787

Active Member

• Sep 20, 2018

• #1

Does it matter which side the shop head goes in when riveting the firewall brackets to the to the upper and lower fuse channels. Would like to use the squeezer. Thanks

 

T

Tommy123

Well Known Member

• Sep 20, 2018

• #2

Rivet

Standard practice is manufactured head is on the smaller piece.

 

az_gila

Well Known Member

• Sep 21, 2018

• #3

Tommy123 said:

Standard practice is manufactured head is on the smaller piece.

Click to expand...

I think you meant "thinner"...

 

T

Tommy123

Well Known Member

• Sep 21, 2018

• #4

az_gila said:

I think you meant "thinner"...

Click to expand...

Yes, thank you for the correction.