VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 08-23-2018, 02:16 PM
FredF FredF is offline
 
Join Date: Oct 2017
Location: Fayetteville, AR
Posts: 2
Default New to VAF

Hi to all VAF members,
After working 6 years on an RV-9A slow build and using this forum to answer my numerous questions during the build I am finally going to jump in and start asking for advice/opinions on completing my 9A.

I have purchased a DL-01SS heater box from Vans thinking it was the stainless version I needed, but have now found out that I maybe should have purchased a stainless TG-10 from another vendor.

Can I use the DL-01SS on my 9A and if so does anybody have pictures of the installation showing how the control cable is routed?

Thanks in advance for any help you can give me.

Fred Fallis
Reply With Quote
  #2  
Old 08-23-2018, 02:22 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 14,324
Default Welcome to VAF

Fred, welcome aboard the good ship VAF
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:41 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.