Originally Posted by Bavafa
I believe the 20-22 ft-lbs is the value for the AN5 bolts that hold the spinner back plate. I would imagine the AN4 bolts for the front plate would take the standard torque value but please let us know if I am incorrect on this.
I installed my prop today and that is how I read it. For the AN5 bolts I also found some variability in the amount of torque to tighten each which I added to the 20 ft/lbs.
Wings, empennage, fuselage and finish very, very slow builds completed. Avionics and engine installed.
Down to last 90%.