Thanks guys - the apple sauce epoxy with a 50-50 cabosil/flox additive worked great.
I put in over 10 cc and I could see it spreading out in all directions from the hole I put in the center of the 4 bolt hinge hole pattern. The excess epoxy made a nice fillet at the edges of the flat hinge area.
EAA Technical Counselor, Airframe Mechanic
Half completed RV-10 QB purchased
RV-6A N61GX - finally flying
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ
Last edited by az_gila : 09-08-2018 at 01:16 AM.