VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 09-07-2018, 05:25 PM
Louavul's Avatar
Louavul Louavul is offline
 
Join Date: Jan 2005
Location: Rio Communities, NM
Posts: 130
Default Screw/Bolt Hole?

Anyone know whats supposed to go in this hole, both sides of the fuselage, just below the fwd fuel tank attach of the RV-7?

I've looked at a number of drawings where I would think the info should be but, keep coming up empty.

Thanks,

__________________
Steven Hild
Rio Communities, NM USA
RV-7, FWF/Fiberglass, N590SC res

Contributing annually since January 2002
Reply With Quote
  #2  
Old 09-07-2018, 05:37 PM
pazmanyflyer's Avatar
pazmanyflyer pazmanyflyer is offline
 
Join Date: Jul 2007
Location: Litchfield Park, AZ
Posts: 825
Default

Per drawings 28 section C-10, it's called out as a 426AD4-6 rivet.

__________________
Carlos in Arizona
EAA Chapter 538 President, www.538.eaachapter.org
Wittman Tailwind W8 N53CH (built & sold)
Pazmany PL-1 N2029 (bought & sold)
RV7 - N537TC (reserved & building)
Emp, Wings & Fuse done - working on FWF

"The air is an extremely dangerous, jealous and exacting mistress. Once under the spell most lovers are faithful to the end, which is not always old age." - Winston Churchill

Last edited by pazmanyflyer : 09-07-2018 at 05:50 PM.
Reply With Quote
  #3  
Old 09-07-2018, 05:43 PM
nilberg nilberg is offline
 
Join Date: Dec 2012
Location: Katy, TX
Posts: 163
Default

I have to disagree with Carlos.

Have a look at DWG 38, Detail F.

It's the lower screw of the reinforcement angle (F-786B) that binds the bracket to the lower and auxiliary longeron. I assume it's pretty critical screw.

Its a AN509 10R12 screw and you need to countersink.

__________________
__________________
Bjorn N - RV 7 in progress
Katy, TX
http://www.mykitlog.com/N741BN

Last edited by nilberg : 09-07-2018 at 05:53 PM. Reason: Added picture
Reply With Quote
  #4  
Old 09-07-2018, 05:49 PM
Louavul's Avatar
Louavul Louavul is offline
 
Join Date: Jan 2005
Location: Rio Communities, NM
Posts: 130
Default

I should add it's a #10 sized hole, always has been, undrilled/enlarged.
__________________
Steven Hild
Rio Communities, NM USA
RV-7, FWF/Fiberglass, N590SC res

Contributing annually since January 2002
Reply With Quote
  #5  
Old 09-07-2018, 05:53 PM
pazmanyflyer's Avatar
pazmanyflyer pazmanyflyer is offline
 
Join Date: Jul 2007
Location: Litchfield Park, AZ
Posts: 825
Default

BJorn is correct. You can see in my pic is says to look at DWG 23 and 38. I missed the detail in my search today.
__________________
Carlos in Arizona
EAA Chapter 538 President, www.538.eaachapter.org
Wittman Tailwind W8 N53CH (built & sold)
Pazmany PL-1 N2029 (bought & sold)
RV7 - N537TC (reserved & building)
Emp, Wings & Fuse done - working on FWF

"The air is an extremely dangerous, jealous and exacting mistress. Once under the spell most lovers are faithful to the end, which is not always old age." - Winston Churchill
Reply With Quote
  #6  
Old 09-07-2018, 05:53 PM
Louavul's Avatar
Louavul Louavul is offline
 
Join Date: Jan 2005
Location: Rio Communities, NM
Posts: 130
Default

Bjorn, you are correct, I now see it on the drawing you said.

Many Thanks!!
__________________
Steven Hild
Rio Communities, NM USA
RV-7, FWF/Fiberglass, N590SC res

Contributing annually since January 2002
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:13 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.