No problems with #433 either. Everything fit like a glove on my HS.
However, while machine countersinking the rear spar I managed to mangle one hole due to chatter. I drilled it out to a #30 size and used a NAS1097 "oops" rivet. You'd be hard pressed to find it from the skin side as it looks just like an AD3 rivet. From the shop head side it's obvious.
RV-14A Kit#140433, N393AJ Reserved
Completed: Vertical Stab/Horizontal Stab
Working on: Empennage (Elevator)
Construction log - mykitlog.com/ajackson
Dues paid on 10 October 2018
Member of EAA Chapter 92
Pet peeve: "Lose" (rhymes with "booze") is the opposite of "find". "Loose" (rhymes with "juice") means "not tight".
Last edited by StressedOut : 09-04-2018 at 02:44 PM.