Wash & prime
Originally Posted by MJarreau
I've followed numerous posts and will prime. My plan:
- mechanical scuff
- Bon Ami rinse/wash/final scuff
Is it reasonable to do the mechanical scuff a week (or 2) prior to priming if the Bon Ami rinse/wash/final scuff is < 2 hours from priming?
Yes. That's how I do it. Sometimes the time between scuff and final wash/prime is weeks.
Just scrub well with grey scotchbrite and Bon Ami. The Aluminum Oxide wil be removed and leave a water break free surface (Hydrophillic).
Estes Park, CO
wirejock at yahoo dot com
Donated 12/01/2017. Plus a little extra.
RV-7A #73391, N511RV reserved (1,800+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.