VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-12/RV-12iS
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-30-2019, 03:45 PM
Bob Y Bob Y is offline
 
Join Date: Jul 2017
Location: Piedmont, SC
Posts: 75
Default Peanut Butter Adhesive Release

Took the dreaded step today of removing the canopy after completing the fiberglass lay up. Wasnít sure what to expect but was pleasantly surprised by the canopy itself, BUT... I was shocked at the amount of adhesive residue left on the fuselage after removing the duct tape. Not sure if it was old tape, the amount of time since applying, cheap brand, or what, but I had a real mess on my hands. Started using Goo Gone adhesive remover but the going was very slow. I jokingly asked my wife if she wanted to help. She got a jar of smooth peanut butter and smeared it on a bad area for several minutes and... IT REMOVED THE ADHESIVE. It even loosened some epoxy that had dripped on the fuselage side sheets! Just thought Iíd pass this trick along.

In hind sight, it might have been better to have applied a layer of Mylar packaging tape first to protect the skins. Hopefully I wonít need to do this again but might be a consideration for those of you that havenít started your fiberglass work.

Moral of the story - donít be afraid to ask for help. Never know who can help.
Reply With Quote
  #2  
Old 04-30-2019, 03:46 PM
bkervaski's Avatar
bkervaski bkervaski is offline
 
Join Date: Mar 2017
Location: Birmingham, Alabama
Posts: 1,251
Default

Nice! You could probably get your dog to do most of the work removing it
__________________
RV-14A #140376
N196 (Flying)
2019 Bronze Lindy
Reply With Quote
  #3  
Old 04-30-2019, 04:20 PM
csdominey csdominey is offline
 
Join Date: Mar 2018
Location: Alvin, Tx
Posts: 9
Default

Have used it for removing old masking tape adhesive. Interesting chemistry of peanut butter!
Reply With Quote
  #4  
Old 04-30-2019, 09:12 PM
RFSchaller RFSchaller is offline
 
Join Date: Oct 2010
Location: Phoenix, AZ
Posts: 2,509
Default

Wow! Hadnít ever heard that. Iíve been using acetone if Iím cleaning bare aluminum
Reply With Quote
  #5  
Old 05-01-2019, 03:27 AM
mike newall's Avatar
mike newall mike newall is offline
 
Join Date: Jan 2005
Location: Yorkshire, England
Posts: 1,774
Default

It's amazing what girls know.....

I'll get my coat
__________________
"I add a little excitement, a little spice to your lives, and all you do is complain!" - Q

Donated in 2018
Reply With Quote
  #6  
Old 05-01-2019, 05:24 AM
Sam Buchanan's Avatar
Sam Buchanan Sam Buchanan is offline
been here awhile
 
Join Date: Dec 2004
Location: North Alabama
Posts: 3,957
Default

Makes the plane smell good!
__________________
Sam Buchanan
1999 RV-6
1918 Fokker D.VII replica
Reply With Quote
  #7  
Old 05-01-2019, 06:45 AM
olyolson's Avatar
olyolson olyolson is offline
 
Join Date: Dec 2009
Location: St Louis, MO
Posts: 848
Default Peanut butter

With all the hours your wife saved, you should take her out for a nice dinner. Sheís a keeper!
__________________
RV-8, Flying
Previous airplanes: Corby Starlet, Citabria, Cessna 140, Vari-Viggen, RV-3, RV-4
RV grin every flight
"Sure is nice to have smart friends"
2018 dues paid
Reply With Quote
  #8  
Old 05-01-2019, 09:46 AM
E. D. Eliot E. D. Eliot is offline
 
Join Date: Dec 2005
Location: San Pedro
Posts: 945
Default Options

I layed down six layers of 6 mil plastic on top of the fuselage instead of tape. It was too many layers and the gap between the fuselage top and the bottom of the layup was too large. Just had to do some sanding on the bottom of the canopy where it meets the top of the fuselage. No tape, etc., required. Worked well and no worry about lifting off the completed fiberglass work. I'll do the same next time only use only two layers of plastic sheet.- easy.
__________________
Building finally
Reply With Quote
  #9  
Old 05-02-2019, 07:38 AM
Snowflake's Avatar
Snowflake Snowflake is offline
 
Join Date: Oct 2009
Location: Victoria, BC, Canada
Posts: 3,467
Default

FYI - WD40 works well too on most adhesives i've tried.
__________________
Rob Prior
1996 RV-6 "Tweety" C-FRBP (formerly N196RV)
Reply With Quote
  #10  
Old 05-02-2019, 07:49 AM
wjb's Avatar
wjb wjb is offline
 
Join Date: Nov 2012
Location: Half Moon Bay, CA
Posts: 903
Default

Also, orange oil (sold as a bike parts cleaner at my local shop) works great on adhesives that acetone, alcohol won't touch. Also smells very good!
__________________
Bill Bencze
N430WB RV-7 #74152, tip-up. Running out of garage projects ... waiting for the hangar (any day now!)
Log at: http://rv7.wbencze.com
Defeating gravity one rivet at a time
VAF 2019 donation happily made
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:32 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.