goatflieg
Well Known Member
I'm getting ready to order my engine from Barrett; Superior IO360 with horizontal induction, using a Plane Power belt-driven alternator. My prop will be a Whirl Wind 200RV, and they will be supplying the Jihostroj P920-028/A prop governor. Barrett wants to know whether the governor will be mounted in the front or the rear. Being a first-time non-A/P builder, I haven't a clue. The Barrett rep said most 360s mount the governor on the rear, but it does vary. Doing more research here: what influences the placement of the prop governor? Based on my planned configuration as described above, what would be suggested?