I have an ICOM A210 Com radio. After some panel maintenance, when I fired everything up again, it was all working except that I couldn't hear my own transmissions when I hit the PTT. I could hear my voice normally through the intercom (a separate box), but when i pressed PTT and was transmitting, I couldn't hear myself through the headset. The radio displayed "TX" and someone in a nearby aircraft verified that my transmissions were being received loud and clear.
A few minutes later, after my run-up, suddenly it started working again, and I could then hear myself through the headset when transmitting.
Any ideas what this might have been?
A few minutes later, after my run-up, suddenly it started working again, and I could then hear myself through the headset when transmitting.
Any ideas what this might have been?