VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 06-13-2017, 04:15 PM
Timberwolf Timberwolf is offline
 
Join Date: Nov 2016
Location: Navarre, FL
Posts: 47
Default Tip up canopy seal?

I'm just finishing the G3X install and want to get my canopy as waterproof as possible in the front area as the rain has already cost me a KN64. I understand most people use the P-type or D-type seal on the front edge to seal it, however the problem that still exists is the hinge area. I can't come up with a simple solution for a seal that will allow full motion of the canopy and still seal out the rain that is liable to seem into the cracks. Anyone have any ideas or pics of how they have sealed off this area?
Reply With Quote
  #2  
Old 06-14-2017, 03:36 PM
rzbill's Avatar
rzbill rzbill is offline
 
Join Date: Nov 2005
Location: Asheville, NC
Posts: 2,371
Default

Read these:

http://www.vansairforce.com/communit...7&postcount=24

http://www.vansairforce.com/communit...8&postcount=14
__________________
Bill Pendergrass
RV-7A: Flying since April 15, 2012. 550hrs
YIO-360-M1B, mags, CS, GRT H1s & A/P, Navworx
Unpainted, polished....kinda'
My RV Construction Page
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 02:50 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.