Home > VansAirForceForums

- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

Old 03-30-2017, 01:11 PM
Iluke Iluke is offline
Join Date: Jun 2011
Location: Hope Valley, Rhode Island
Posts: 93

Originally Posted by Raymo View Post
If installing the fuel pump/filter on the inside, just forward of the selector valve, the firewall doubler won't be needed as depicted in OP 32.

For the brake reservoir, I only drilled out one existing rivet, if I recall. I don't think the spacing of the reservoir holes is not the same as the rivet spacing.

I may have misspoke, but I think is is the firewall doubler shown on DWG 19 that you don't need if you're installing the fuel injection high pressure inside pump. I'm referring to the F-601Z Aux Fuel Pump Doubler shown in the lower right hand corner of DWG 19.

The doubler shown on Op 32, if I am reading the plans right, is needed even with the FI pump to strengthen the firewall where the fuel line passes through.

If I'm understanding this wrong (it's happened, let me tell you!), please set me straight..

Ivan Luke
Hope Valley, RI
Wings complete
Fuselage in progress
2016 dues paid
Reply With Quote
Old 05-21-2017, 09:04 PM
jcarne's Avatar
jcarne jcarne is offline
Join Date: Jul 2016
Location: Worland, Wyoming
Posts: 144
Default Riveting order on elevators. E-703 and E-704 to E-702

I have attached a picture with a red arrow. The plans have you rivet E-704 and E-703 together before attaching to the elevator spar. However, when you go to rivet these ribs to the elevator spar you can't get most squeezers on these two rivets and they are difficult to buck as you need to use an offset tool. You can avoid this problem if you FIRST rivet E-704 to the spar and then rivet E-703 rib to E-704.

Jereme Carne
RV-7A Emp. coming along
Working on Wings
Exempt but gladly paying!
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 04:35 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.