VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 05-25-2017, 09:31 AM
JDA_BTR JDA_BTR is offline
 
Join Date: Dec 2013
Location: Baton Rouge, LA
Posts: 397
Default Page 36-20 canopy cradle assembly

Is there any reason the canopy cradle assembly can't be put in before riveting the forward top skin? The release mechanism has to wait due to riveting interference. I tools like the main issue is interference with the bushing and the corner rivet. I'm tempted to put a flush cherry there and the two othe places where the bolts protrude on each side in trade for easier assembly.
__________________
<------------------------------------------------->
N1463 seems a good number....
<------------------------------------------------->

Last edited by JDA_BTR : 05-25-2017 at 09:41 AM.
Reply With Quote
  #2  
Old 05-25-2017, 12:59 PM
Arablenz Arablenz is offline
 
Join Date: Dec 2014
Location: South Island ,New Zealand
Posts: 33
Default

I am at the same stage but the way I read it is you rivet as many rivets in for the centre piece call out before removing the bolts holding the bushing to finally get at those difficult rivets. I am hoping to do this today as have been waiting on my better half to work the rivet gun. I could have riveted them in myself but the plans call for you to have the whole skin clecoed, the way I read it, making access difficult.
Reply With Quote
  #3  
Old 05-26-2017, 12:33 AM
Arablenz Arablenz is offline
 
Join Date: Dec 2014
Location: South Island ,New Zealand
Posts: 33
Default

Sorry I may have read your question wrong. I have done as per instructions with no problem but am only riveting up centre section until I get avionics etc in. Putting the assembly in is not to difficult once centre section riveted.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:12 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.