I've been designing my instrument panel in Solidworks.
I wanted to make it IFR or IFR upgradable so I made room for a GTN 650 and a D6.
Some of the parts are improvised where they were not available online. The firewall and subpanel incorrectly show cutouts left and right like the -7 IP because that's what I started with.
I wanted to make it IFR or IFR upgradable so I made room for a GTN 650 and a D6.
Some of the parts are improvised where they were not available online. The firewall and subpanel incorrectly show cutouts left and right like the -7 IP because that's what I started with.
Last edited: