I have to replace my main gear tires. I also want to send them to Antisplat for the wheel bearing upgrade, so I need both wheels off at the same time.
If I use a stand under the tail to secure it, can I then use an engine hoist to jack up from the engine lift point, to raise the airplane up off of the mains? I would then remove the wheels and set the gear legs back down on some wood.
If I use a stand under the tail to secure it, can I then use an engine hoist to jack up from the engine lift point, to raise the airplane up off of the mains? I would then remove the wheels and set the gear legs back down on some wood.