VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 01-07-2019, 12:56 PM
larrys larrys is online now
 
Join Date: May 2017
Location: Colorado Springs
Posts: 119
Default RV-14A hinge pins for front hood

We are building a RV14A and looking at the finish kit it shows the hinge around the front hood / engine covers. And the QB fuselage kit came with half the hinges installed on the lips around the firewall and the clip in the upper middle of the firewall for holding /pulling the hinge pins

How do you get to it to pull the pins for the top cover facing the cockpit - though the oil access door?

If that is the case what is another system that would work better? I assume I would check the motor area in a pre flight check, at first all the time.

I did note that "E" used Sky Bolts. It there a better system? That would not take a tool to open?

Thanks, Larry
__________________

RapidsetBuildings.com (Hangars)
Advertiser
RV-14 tail, QB Fuselage, Finish kit, QB wings and FF kit
Grateful to pay dues 19'

Reply With Quote
  #2  
Old 01-07-2019, 02:46 PM
Logan Logan is offline
 
Join Date: Nov 2014
Location: Houston, Tx
Posts: 41
Default

Yep, the standard approach is to reach in through the oil door to install/remove the pins when taking the cowling on and off. It is hard, but not impossible and makes for a clean installation.

Other solutions for securing the cowling do exist, of course. I'm sure with their own pros and cons.
__________________
Logan Dent

RV-14A Complete!
Airworthiness cert issued June 27, 2018
Reply With Quote
  #3  
Old 01-07-2019, 02:49 PM
bkervaski's Avatar
bkervaski bkervaski is online now
 
Join Date: Mar 2017
Location: Birmingham, Alabama
Posts: 896
Default

It's all about your angle of attack ... try standing on a stool so your elbow is at a more natural bend ... makes all the difference. Trying to install them standing on the ground is painful and if you have big arms almost impossible.

Also know that as they wear in it becomes a lot easier to install and remove them. Use plenty of Boelube the first 10-15 times.

I like the hinge pin system, keeps everything nice and snug and very clean looking.
__________________
#140376 RV-14A QB IO-390 Thunderbolt
Registered: N196
Progress: Flying!

Last edited by bkervaski : 01-07-2019 at 02:53 PM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:31 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.