VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics


Go Back   VAF Forums > Model Specific > RV-8/8A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-03-2019, 10:39 PM
jdmunzell jdmunzell is offline
 
Join Date: Jun 2005
Location: Hamilton, VA
Posts: 415
Default Things to consider before installing/riveting the aft upper fuselage skin

Hey all, I know there is great direction in the manual about installation of certain things in aft fuselage, but i wanted to probe the group about things that I might forget about otherwise...once that skin is attached, it can be quite difficult to reach back there!
__________________
Jeff
-8 wings, finishing up
-8 QB Fuse just arrived!!!
Reply With Quote
  #2  
Old 01-04-2019, 12:07 AM
Wunderon's Avatar
Wunderon Wunderon is offline
 
Join Date: Jun 2014
Location: Seattle (Edmonds) and Iowa
Posts: 140
Default

Well I did the mount for the ADAHRS and an avionics tray. Removable so the bucker could get in there. Wire routes for tail lights and/or trim.
__________________
Dave Grimmer
RV8 firewall forward
Edmonds WA
paid 2018
Reply With Quote
  #3  
Old 01-04-2019, 12:58 AM
Robin8er Robin8er is offline
 
Join Date: Sep 2015
Location: Oahu HI
Posts: 241
Default

Install elevator push tubes, ELT, static system, all nut plates for the baggage compartment, wires for anything in the tail.
__________________
RV-8
N695RA Reserved
Emp and Wings done, working on Fuselage.

Born to fly, forced to work
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:17 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.