VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 12-28-2018, 11:31 AM
flyenforfun's Avatar
flyenforfun flyenforfun is offline
 
Join Date: Aug 2009
Location: Wilmington DE
Posts: 322
Default HS-00003 Material

Does anyone know what material The spar Doubler HS-00003 is? Iím going to have to make my own I canít get the edge distance from the ones provided in the kit.
__________________
Matt Giordano Sr. and Jr.
RV-8 - N861MM
Wilmington, DE
Reply With Quote
  #2  
Old 12-28-2018, 12:29 PM
Blake Blake is offline
 
Join Date: Oct 2018
Location: Raymond wa
Posts: 13
Default

Call vans they will sell you a blank sheet of aluminum that they make the doublers out of. I did that because I had to make one doubler from scratch to finish my rv-7 horizontal stabilizer
Reply With Quote
  #3  
Old 12-28-2018, 01:02 PM
nzrv8's Avatar
nzrv8 nzrv8 is offline
 
Join Date: Jun 2009
Location: Australia and NZ
Posts: 152
Default

Just checking that you've seen the edge distance amendment added to the SB? (Page 21).

I had an old version of the SB and ended up replacing my doublers without needing to. The amendment states a lower ED margin (lower than mil spec) and adding extra rivet locations in the event that the ED's aren't met. Might save you some re-work..
__________________
Paid up - Dec 2018
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:39 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.