VansAirForceForums  
Home > VansAirForceForums

- POSTING RULES
- Donate yearly (please).
- Advertise in here!

- Today's Posts | Insert Pics

  #1  
Old 12-18-2018, 03:05 PM
Eric B Eric B is offline
 
Join Date: Jan 2005
Location: MS
Posts: 29
Default Just got my Emp kit, have a question

I was reviewing the plans and the online plan revisions. Have to be careful to make certain if one is looking at "RV-12" plans versus "RV-12iS". With that said, I found one page in Section 12, "RV-12" page 8 that has a newer online review. I'll print that and tuck it inside the plans.
My question stems from the Stabilator box cracking SB. The stabilator section is an "RV-12iS", so I can assume the changes made in the SB to the RV-12 plans are included in my plans? Or alternatively, when looking for updates, I should look for updates to the version I have, whether -12 or -12iS?
Thanks!
__________________
There are only 10 kinds of people in the world, those who understand binary and those who don't.
Reply With Quote
  #2  
Old 12-18-2018, 03:17 PM
rvbuilder2002 rvbuilder2002 is offline
 
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 8,147
Default

Quote:
Originally Posted by Eric B View Post
I was reviewing the plans and the online plan revisions. Have to be careful to make certain if one is looking at "RV-12" plans versus "RV-12iS". With that said, I found one page in Section 12, "RV-12" page 8 that has a newer online review. I'll print that and tuck it inside the plans.
My question stems from the Stabilator box cracking SB. The stabilator section is an "RV-12iS", so I can assume the changes made in the SB to the RV-12 plans are included in my plans? Or alternatively, when looking for updates, I should look for updates to the version I have, whether -12 or -12iS?
Thanks!
Yes is the answer to both of your questions.
__________________
Any opinions expressed in this message are my own and not necessarily those of my employer.

Scott McDaniels
Hubbard, Oregon
RV-6A (aka "Junkyard Special ")
Reply With Quote
  #3  
Old 12-27-2018, 08:12 AM
rgaynor rgaynor is offline
 
Join Date: Dec 2018
Location: Boca Raton, FL
Posts: 18
Default

Hi Eric,

I emailed Van's Support about this same SB applicability question for RV-12is build. The answer I received was that you can pretty much determine the applicability of the Horizontal Stabilizer Bulletin by the model number of the control horns in your kit. If the control horns are WD-1207 and WD-1208 and not WD-01207-1 and WD-01208-1 then the bulletin is applicable but if you have the newer control horns, then you should be able to just follow the steps in the plan. Hope that helps.
Rob
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:59 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.