704CH
Well Known Member
Ok guys, I have gotten through the empennage fairly successfully and am moving fairly quickly through the wings. Here I am trying to rivet on the Z Bracket root nutplates for an RV 7. You know the ones that attach to the underside of the spar when it is on the stand. This I found to be a pain in the rear and am looking for feedback on a mistake. My bucking bar slipped and smacked the spar web, didn?t break through the anodizing, but left a good mark. Also nicked the flange of the 2nd main rib, but am sure the rib issue isn?t significant. The part I am worried about is the main spar. Any feedback on these photos? Looking for all those who like to attack mistakes to really take a look at this one.
The thing about building a plane is it?s tough to know what is good enough. No such thing as a perfect plane, I know, but man I am frustrated and get upset with issues like this. Please look at the pictures and provide feedback.
Thanks everyone, Hey, if you want to tell me I am worried about nothing, that would be the best response I could get. -thx
Oh, don?t worry about feedback regarding ways to avoid this since I am already here. ;-) thx
http://picasaweb.google.com/RV704CH...CMeQ&pli=1&gsessionid=Ksro-qcOD9wxviaiopLNEA#
The thing about building a plane is it?s tough to know what is good enough. No such thing as a perfect plane, I know, but man I am frustrated and get upset with issues like this. Please look at the pictures and provide feedback.
Thanks everyone, Hey, if you want to tell me I am worried about nothing, that would be the best response I could get. -thx
Oh, don?t worry about feedback regarding ways to avoid this since I am already here. ;-) thx
http://picasaweb.google.com/RV704CH...CMeQ&pli=1&gsessionid=Ksro-qcOD9wxviaiopLNEA#