I'm having a new panel put in, almost all Dynon avionics (HDX, Dynon radio and intercom, etc). I'm toying with the idea of keeping my Garmin SL-30 for VOR/ILS usage (IFR cert), as well as for a secondary Comm radio. The Dynon intercom does NOT give the ability to have two Comm radios. Is there any way to wire the SL30 with a switch to make it usable as a second comm radio, yet leaving it available for NAV capability for the ILS/VOR signal to be sent to the HDX screen if it's not switched on as the primary Comm radio? I would like to be able to do this without retaining my Garmin 340 Intercom. Also, I will NOT have a GPS navigator, other than the Dynon GPS 2020 for enroute nav, but not GPS approaches.
Thanks for your inputs with this question!
Tom
Thanks for your inputs with this question!
Tom