Throttle/Mixture Cable Routing...

Looking for suggestions and experience with similar applications routing throttle and mixture cables to a fwd facing fuel servo with a 4-pipe exhaust arrangement. Without getting very creative using bellcranks, etc., I am having a hard time seeing how I might route the cables without subjecting them to extreme heat from the exhaust pipes.

Any suggestions?? Info on actual experiences with routing and anchoring between the pipes would be greatly appreciated.

Thanks in advance.

Bryan
Houston

I will certainly take any novel, new suggestions. But in the mean time, I've found a nice installation photo with a 4 pipe and Superior sump that answers my questions. Moderators, delete this thread if you wish.