Weasel
Well Known Member
Just an idea if you run into this.
When mounting a landing light in the wingtip, there is a gap around the light that needs to be filled to finish the installation cosmetically.
Here is what we came up with.
Thanks again to EAA and DS for providing Solidworks to us for drawing the part in 3 dimension.
ed....its a bezel not bezle but ah well who cares
When mounting a landing light in the wingtip, there is a gap around the light that needs to be filled to finish the installation cosmetically.
Here is what we came up with.
Thanks again to EAA and DS for providing Solidworks to us for drawing the part in 3 dimension.
ed....its a bezel not bezle but ah well who cares
Last edited: