I bought a Comant CI 158C Vee Dipole that I want to mount on top of the VS. The instructions really didn't explain how to properly ground the antenna. I thought it would be through the bolts but it looks like the casing of the antenna is non metallic. I see a flange at the base of the BNC connector which looks to me like it should be the ground so...........what I was going to do is drill a hole in the web of the top rib of the VS just large enough for the 1/2" flange to touch around it's perimeter (snug fit). Will this be adequate or should I be looking at some other way of accomplishing the mission?
Thanks!
Thanks!