Hi all. I am looking for a little help on my panel planning. I have the following setup planned and purchased.
Dynon 10" touch, AP panel, knob control, Garmin GMA245, Garmin 530W, Garmin GTR200, Gemini PFD.
Now, I need to finalize the sub panel layout for the remaining hardware so Stein can build my harness. Part of the process, I need to inform Stein what lengths for the components.
Dynon:
SV-261 transponder
SV-ADSB-472
SV-BAT-320
SV-ARINC-429
SV-EMS-220
Anything else I am missing?
I have not torn out my existing panel to lay things out. I was hoping friends of the forum could help with pics of your layout and advise so I know how to have Stein build my harness lengths.
Thanks so much for all your help! Josh
Dynon 10" touch, AP panel, knob control, Garmin GMA245, Garmin 530W, Garmin GTR200, Gemini PFD.
Now, I need to finalize the sub panel layout for the remaining hardware so Stein can build my harness. Part of the process, I need to inform Stein what lengths for the components.
Dynon:
SV-261 transponder
SV-ADSB-472
SV-BAT-320
SV-ARINC-429
SV-EMS-220
Anything else I am missing?
I have not torn out my existing panel to lay things out. I was hoping friends of the forum could help with pics of your layout and advise so I know how to have Stein build my harness lengths.
Thanks so much for all your help! Josh