I just received my plans for the firewall forward kit and noticed that the voltage regulator is now to be mounted beneath the panel base, right side. There is a template on page 46-3 that cautions to check the scale before drilling and the one provided with my package is off by 1/4 inch in hole spacing.
Additionally, if you installed the engine brackets (WD-1204) with the shop heads on the bottom (down), there will be interference with the new regulator position.
Mitch Garner
Additionally, if you installed the engine brackets (WD-1204) with the shop heads on the bottom (down), there will be interference with the new regulator position.
Mitch Garner