Stockmanreef
Well Known Member
I would like to make sure that I am correct in finding an error in the file tank section (16 or 18 in new plans).
http://i1335.photobucket.com/albums/w663/Kenneth_Stockman/photo-17_zps072b99dc.jpg
Step 3 says to dimple to the two 19 holes in the T-1005B shim.
It should be the T-1005-C shim. Correct?
I checked the corrections from Vans and did not see this correction.
I would like to get this verified before I email Vans.
Thanks
Ken
http://i1335.photobucket.com/albums/w663/Kenneth_Stockman/photo-17_zps072b99dc.jpg
Step 3 says to dimple to the two 19 holes in the T-1005B shim.
It should be the T-1005-C shim. Correct?
I checked the corrections from Vans and did not see this correction.
I would like to get this verified before I email Vans.
Thanks
Ken