Vtachgen and Dynon

Does anyone have the setting for using the tach signal generator that Van's sells (vtachgen) and a Dynon 180
engine monitor system?

I seem to remember it being 1 PPR from past customers using it.

No harm in firing up the engine with it not set correctly. It will be pretty obvious if it is off, since your engine will be at a nice idle and will read 350 or 1400 even though it's at 700.

Thanks. I was actually asking because it came up on a different forum and I just thought I'd be the middle man. I've passed the answer back to him.

Here's a link to the other place. I hope Doug forgives me for posting it here. (I still love Doug's place best!)

http://forums.matronics.com/viewtopic.php?t=74747