I'm having an alignment problem with the adjustable rudder release assembly alignment relative to the release pin. The pivot bushing for the release assembly is not aligned with the release pin hole (see WD-816). I've ground/filed off quite a lot on the right side of this bushing so the release assembly would clear it and I'm filing next to the attaching weld now. Vans tells me they are all like this.
So, if they are all like this, what is everyone doing to line these up?
Jerald King
-8 slowing fuselage
Tucson
So, if they are all like this, what is everyone doing to line these up?
Jerald King
-8 slowing fuselage
Tucson