I?m getting ready to do my fiberglass lay up of the fairing on the windscreen using Rutan 9 oz bi-directional Fiberglass cloth cut on the bias. My thought is that it should lay down better and be just as strong as uni-directional fiberglass. Additionally, I?m taking some of the techniques from the RV-14 process by starting the lay up with a 4? fiberglass layer impregnated with black dyed epoxy resin. All remaining fiberglass strips will then be applied as per plan but now using un-dyed resin.
Fiberglass work is not my strong suit so I?m looking for any comments, concerns or inputs on my plan. Thanks in advance for your time.
Fiberglass work is not my strong suit so I?m looking for any comments, concerns or inputs on my plan. Thanks in advance for your time.