Working on panel design and pretty sure I will use Carling Rocker switches. Ideally, I want to configure the momentary switch for various circuits as a toggle switch. Example: OFF-(ON) for a NAV light. OFF is the normal state, when you press the switch down the nav lights come one (and the dependent LED turns on). When you release the switch, it goes back to center and the nav lights stay on. When you want to turn off, you again press the switch down and the NAV lights turn off (as well as the dependent LED). I think the proper term for this is using a momentary switch as a toggle switch. As the switch is not a 3 way, I am not sure how people implement this. Is it done with a special relay? Are they adding additional logic or just wiring the switch in a way I don't yet understand? Thanks is advance.
Last edited: