For my G3X system in an RV-8, I'm planning a good VFR/Basic IFR panel with a a 10.6 inch PFD, G5 Standby ADI, GTN 375 Navigator/Transponder, a panel mount COMM/NAV, and a panel mount COMM. Can you point me in the right direction for a planning block diagram that shows these items plus the required behind-the-panel adapters, controllers, and any other miscellaneous boxes that are needed to make everything work.
I also have a parallel project in a certified airplane using a G500 TXi system with a similar set of displays - 10.6" PFD and G5, with a GTN 650 or 750 TXi WAAS/NAV/COM, a panel mount COMM, ADS-B Transponder, and the ability to integrate with an STEC 60-2 Autopilot. A block diagram of other required boxes would help me know what purchases, beyond the obvious, I need to make.
Thanks for pointing me in the right direction!
Kwn Cockrell
I also have a parallel project in a certified airplane using a G500 TXi system with a similar set of displays - 10.6" PFD and G5, with a GTN 650 or 750 TXi WAAS/NAV/COM, a panel mount COMM, ADS-B Transponder, and the ability to integrate with an STEC 60-2 Autopilot. A block diagram of other required boxes would help me know what purchases, beyond the obvious, I need to make.
Thanks for pointing me in the right direction!
Kwn Cockrell